Kenwood KDC-DAB41U Car Stereo System User Manual


 
English 35
Continued to next page
150 mm
70 mm *
1
Antenna film F
Earth sheet
Earth sheet
Amplifier G
Amplifier G
Front pillar
When installing the antenna on the left side
When installing the antenna on the right
side
Antenna film F
150 mm
70 mm *
1
Determining the antenna installation location
Antenna Installation
1 Check the installation location.
2 Wipe the area where antenna film F,
amplifier unit G, and earth sheet are
pasted with the included cleaner I.
The coating on the metal surface need not
be removed.
Wait until the glass surface is completely
dry before pasting.
If the glass surface is cold, such as during
winter, warm it with defroster or dryer.
3 Remove the separator (tag I) of antenna
film F horizontally and paste the
antenna on the front glass.
Remove the separator gently.
Do not touch the pasting surface
(adhesive side) of the antenna film F.
4 Remove the separator (tag II) of antenna
film F vertically and paste the antenna
gently while applying pressure.
5 After pasting, rub the element in the
glass surface in the direction of the arrow
shown in the figure to bond it.
6 Remove the application film (tag III).
Do not touch the feeder terminal of the
element. Also, do not apply any glass
cleaner.
Feeder terminal
• *
1
Where the earth sheet of Amplifier G can be pasted on the metal part of the front pillar.