Filter
Top Products
English
19
RBDS features (See page 9)
RBDS (Radio Broadcast Data System)
RBDS is a service used by radio stations to transmit data
outside normal radio broadcast signals.
When an RBDS station is received, you can immediately find
out what kind of data is being transmitted by looking at the
program service name, which appears in the display after the
frequency.
The AF indicator turns on when an RBDS station is being
received.
Alarm
When an emergency transmission (announcing disasters, etc.)
is made, the current function will be interrupted to allow the
warning to be received under the following conditions:
during tuner reception, or when the Traffic Information
function is turned on.
Radio Text
You can display textual information being transmitted by
RBDS stations. The text is scrolled in the display.
Turning on Radio Text Display Mode:
Pressing the PS/RT button switches the display as follows.
Select the Radio Text Display mode.
▼
Station frequency
▼
Program Service name
▼
Radio text
▼
Clock
If the RBDS station currently tuned to is transmitting no text
while the Radio Text Display mode is turned on, "NO TEXT" will
appear in the display. While awaiting reception, "WAITING" will
scroll across the display.
NOTE
To prevent accidents, drivers should not look at the display while
on the road.
2WARNING
Traffic Information Function
You can listen to traffic information. If you are listening to
tapes or discs, they will continue playing until a traffic bulletin
is broadcast.
Turning TI function On/Off:
Press the TI button for at least one second to turn the function
on and off.
When the function is on, the TI indicator is turned on.
When a traffic information station is being received, the TP
indicator will turn on. When none is being received, the TI
indicator will blink on and off.
When a traffic bulletin begins to be broadcast, the TA indicator
will turn on.
If you are listening to a tape or disc when a traffic bulletin
begins, they will automatically be turned off. When the
bulletin ends or poor reception is experienced, the tape or disc
will begin playing again.
Pressing the TI button while in the AM band automatically
switches reception to the FM band. However, the AM band is
not returned to when the TI button is pressed again.
Switching to a Different Traffic Information Station:
Use the 4 / ¢ buttons to make an auto seek of the TI
stations in a certain band.
When you are listening to a tape or disc, you cannot change to
another TI station.
NOTE
NOTE