Filter
Top Products
34
English
Make sure that the unit is installed securely in place. If the unit is
unstable, it may malfunction (for example, the sound may skip).
NOTE
Bend the tabs of the
mounting sleeve with a
screwdriver or similar
utensil and attach it in
place.
Accessory2
Phillips truss
head sheet
metal screw
(commercially
available)
Firewall or metal support
Accessory4
Installation
■
Installation (non-Japanese cars)
Removing the hard rubber frame
■
Engage the catches on the removal tool3 and remove the two
locks on the lower level, leaving the removal tool9 inserted on
the upper level.
Lower the frame and pull it forward as shown in the figure.
2
You will feel (not hear) a click when the tabs lock securely.
NOTE
Lock
Insert the removal tool9 deeply with the cut placed to the
right to remove the upper locks at an angle as shown below.
1
Accessory9
Removal tool
Catch
Lock
Installation (Japanese-cars)
Accessory3
Removal tool
Cut