Filter
Top Products
10
|
KDC-U7056DAB/ KDC-U7056BT/ KDC-U7056BTL
English
|
11
Basic operations
3-5. General operations
Power
Press [SRC] to turn the power ON.
Press and hold [SRC] to turn the power OFF.
Source selection
Press [SRC].
The source will switch each time upon pressing the
button.
Source Display
Standby “STANDBY”
Digital radio[2] “DIGITAL RADIO”
Tuner “TUNER”
USB device connected to front USB terminal “USB(FRONT)”
USB device connected to rear USB terminal “USB(REAR)”
iPod connected to front USB terminal[1] “iPod(FRONT)”
iPod connected to rear USB terminal[1] “iPod(REAR)”
Pandora® of iPod connected to front USB
terminal[1][2][3]
“Pandora(FRONT)”
Pandora® of iPod connected to rear USB
terminal[1][2][3]
“Pandora(REAR)”
Pandora® of device connected via Bluetooth[1]
[2][3]
“Pandora”
aha™ of iPod connected to front USB
terminal[1]
“aha(FRONT)”
aha™ of iPod connected to rear USB
terminal[1]
“aha(REAR)”
aha™ of device connected via Bluetooth[1] “aha”
Bluetooth audio “BT AUDIO”
CD[1] “CD”
Auxiliary Input “AUX”
[1] This source can be selected only when it can be played.
[2] Function of KDC-U7056DAB
[3] Function of KDC-U7056BT.
Setting the source switching
• Source switching can be set so that pressing [SRC] switches
among sources. For more details, refer to <12-5. Initial
settings> (page 60).
• Source switching can be set so that “Pandora”, “aha”, and
“AUX” sources can not be selected when not in use. For
more details, refer to <12-5. Initial settings> (page 60).
Volume
Turn [Control] knob.
USB terminal
A USB device or iPod can be connected.
The CA-U1EX (Max. 500mA) or KCA-iP102
(optional accessories) is recommended to
connect a USB device or iPod.
Auxiliary input
A portable audio device can be connected with
a stereo mini-plug (3.5 mm ø).
3-4. Adjusting the clock
Press [Control] knob.
Enters the Function setting mode.
Select “Settings” > “Clock&Date” > “Clock
Adjust” using [Control] knob.
For how to use [Control] knob, refer to <3-3. How
to select the item> (page 9).
Set the hour using [Control] knob.
Set the minute using [Control] knob.
Exiting from the Function setting mode
Press and hold [1/6].