Filter
Top Products
English
|
19
Function of KTC-HR300/ KTC-HR200 (Optional
Accessory)
HD Radio Settings
37 Seek Mode: “Seek Mode” ➤ “Auto1”, ”Auto2”,
”Manual”
Selects the tuning mode of the radio.
Tuning mode Display Operation
Auto seek “Auto1” Automatic search for a station.
Preset station seek “Auto2” Search in order of the stations in
the Preset memory.
Manual “Manual” Normal manual tuning control.
38 Auto Memory: “Auto Memory”
Memorizes six stations with good reception
automatically.
Turn the Control knob to select “YES” and then
press the [ENTER] button to start the auto
memory operation.
39 Receive mode: “Receive mode” ➤ “Auto”,
”Digital”, “Analog”
Sets the receive mode of the HD Radio.
Auto: Automatically tunes to analog broadcast
when there is no digital broadcast.
Digital: Digital broadcasts only.
Analog: Analog broadcasts only.
40 Memory count display: “TAG Memory”
Displays the tag memory usage of HD Radio. Up
to 50 tags can be registered to this unit.
41 iTunes Tagging: “Tagging” ➤ “ON”, ”OFF”
Turns ON / OFF the iTunes tag memory function
of HD Radio.
Refer to <iTunes Tagging> (page 25).
Function of Satellite Radio tuner (Optional
Accessory)
Satellite Radio Settings
42 Seek Mode: “Seek Mode” ➤ “Channel”, ”Preset”
Selects the tuning mode of the radio.
Display Operation
“Channel” Normal manual seeking control.
”Preset” Search in order of the channels in the Preset memory.
43 ESN watch: “ESN Watch”
Displays the Electronic Serial Number of satellite
radio.
Function of KCA-BT200 (Optional Accessory)
Bluetooth Settings
44 Phone Selection: “Phone Selection”
Select a cell-phone subject to hands-free
connection. Refer to <Selecting the Bluetooth
device You Wish to Connect> (page 34).
45 Audio Selection: “Audio Selection”
Select the Bluetooth audio player to be
connected. Refer to <Selecting the Bluetooth
device You Wish to Connect> (page 34).
46 SMS Download: “SMS Download”
Download a short message. Refer to
<Downloading the SMS> (page 37).
47 SMS Inbox display: “SMS Inbox”
Display the received short message. Refer to
<Displaying the SMS> (page 37).
48 Adding a voice command: “PB Name Edit”
Registers voice for voice recognition. Refer to
<Adding a voice dialing command> (page 35).
49 Voice command category setting: “PN Type
Edit”
Registers voice to select the Phone number
category in Phonebook. Refer to <Setting a Voice
Command for Category> (page 36).
50 Device Regist: “Device Regist.”
Register a Bluetooth device (pairing). Refer to
<Registering Bluetooth device> (page 32).
51 Special Device Regist: “SPCL DVC Select”
Allow registration of a special device that cannot
be registered normally. Refer to <Registering
Special Bluetooth device> (page 32).
52 Device Delete: “Device Delete”
Cancel registration of the Bluetooth device. Refer
to <Deleting a Registered Bluetooth device>
(page 34).
53 PIN Code Edit: “PIN Code Edit”
Specify the PIN code required when registering
this unit using the Bluetooth device. Refer to
<Registering PIN Code> (page 33).
54 Setting the Time Interval for Automatic
Answer: “Auto Answer” ➤ ”OFF”, “0SEC” – “8SEC”
– “99SEC”
This function automatically answers (responds
to) a call after lapse of the preset time interval for
automatic answer.
“OFF” : Does not answer the phone call
automatically.
“0” : Automatically answers the phone call at once.
“1s” – “99s” : Automatically answers the phone call
after lapse of 1 – 99 seconds.