Filter
Top Products
20
|
KDC-X494/ KDC-MP445U/ KMR-440U
Function setting
55 Speaker Select: “Bluetooth HF/Audio” ➤
“Front”, ”All”
You can specify output speakers for hands-free
voice communication and Bluetooth audio sound.
“Front” : Outputs sound from the front speakers.
“All” : Outputs sound from the front and rear
speakers.
56 Setting the Beep of the Incoming Call: “Call
Beep” ➤ “ON”, ”OFF”
You can output a beep from the speaker when a
call comes in.
“ON” : Beep is heard.
“OFF” : Beep is canceled.
57 BT F/W Update: “BT F/W Update”
Displays the firmware version and update the
firmware. Refer to <Displaying the Firmware
Version> (page 34).
⁄
• The Bluetooth Function setting items can be set while in
the Bluetooth mode without selecting the Function setting
mode.
1. Press the [FNC] button for at least 1 second to enter the
Bluetooth mode.
2. Turn the Control knob to select “BT Setting”, and then
press the [ENTER] button.
3. Turn the Control knob to select desired item, and then
press the [ENTER] button.
4. Turn the Control knob to select value, and then press the
[ENTER] button.