Kenwood KDC-X597 Car Stereo System User Manual


 
11
ENGLISH |
BLUETOOTH®
Bluetooth mode operations
1 Press to enter Bluetooth mode.
2 Turn the volume knob to make a selection (see the following table), then
press the knob.
Repeat step 2 until the desired item is selected.
• To return to the previous hierarchy, press
.
• To cancel, press .
PHONE BOOK
1
Turn the volume knob to select a name, then press the knob.
2
Turn the volume knob to select a phone number, then press the knob to call.
• To return to the previous hierarchy, press .
• If the phone supports PBAP, the phonebook of the connected phone is
automatically transferred to the unit when pairing. If the phone does not
support PBAP, “NO DATA” appears. Transfer the phonebook manually.
(
12, TRANSFER PB)
• Contacts are categorized as: GE (general), HM (home), OF (office), MO (mobile),
OT (others).
• This unit can display only non-accent letters. (Accent letters such as “Ú” is
showns as “U”.)
• If the phonebook contains many contacts, use Alphabet Search. (
12)
CALL HISTORY/
HISTORY
1
Turn the volume knob to select a name or a phone number.
“I” indicates call received, “O“ indicates call made, “M” indicates call missed.
• Press
SCRL DISP
to change the display information (name or phone
number).
• “NO DATA” appears if there is no recorded call history.
2
Press the volume knob to call.
NUMBER DIAL
1
Turn the volume knob to select a number (0 to 9) or character ( ,
#
, +).
2
Press
4 / ¢
to move the entry position.
Repeat steps
1
and
2
until you finish entering the phone number.
3
Press the volume knob to call.
(or using RC-406)
1
Press the number buttons (
0
to
9
)
to enter the phone number.
2
Press
to call.
DVC PRIORITY/
DVC PRI
MAIN-XXX/ SUB-XXX: To view which device is connected as MAIN and which is
connected as SUB.
Bluetooth mobile phone
To Do this
Receive a call
Press or the volume knob or one of the number
buttons (1 to 6) (or on RC-406).
• The button illuminates and flashes in green
(for
KDC
-
X597
/
KDC
-
BT555U
) or flashes in red
(for
KDC
-
BT355U
) when there is an incoming call.
During a call, the button illuminates in red.
• When
[AUTO ANSWER]
is set to the selected time, the
unit answers incoming call automatically.
(
12)
Reject an incoming
call
Press L SRC (or on RC-406).
End a call
Press or L SRC (or on RC-406).
Switch between
hands-free and
private talk modes
Press 6 38 during a call.
• Operations may vary according to the connected
Bluetooth device.
Adjust the phone
volume
Turn the volume knob during a call.
Phone volume:
[00]
to
[35]
(Default:
[15]
)
• This adjustment will not affect the volume of the
other sources.
Switch between two
connected phones
1 Press to enter Bluetooth mode.
2 Press and hold to switch between the two
connected phones (
[MAIN]
/
[SUB] )
.
Text message notification
When the phone receives a text message, the unit rings and “SMS RECEIVED” or
“NEW SMS” appears.
• You cannot read, edit, or send a message through the unit.
• To clear the message, press any button.
EN_KDC-X597[KWK0]f.indd 11EN_KDC-X597[KWK0]f.indd 11 10/19/12 5:19:34 PM10/19/12 5:19:34 PM