Kenwood KDC-X993 Car Video System User Manual


 
English
|
29
Cabin selection
You can compensate the delay of the sound arrival
time by selecting your environment from the
following car types;
Car type Display
Not compensating. “OFF”
Compact car “Compact”
Full size car “Full size car”
Station wagon “Wagon”
Minivan “Minivan”
Sport-utility vehicle “SUV”
Long Minivan “Minivan (Long)”
1 Enter Cabin select mode
Select “SOUND” > “Setup” > “Cabin”.
For how to select Function Control item, refer to
<Function Control> (page 6).
2 Select the car type
Turn the Control knob and push the center
when the desired item is displayed.
Exit Cabin select mode.
• You can compensate the distances in more details by
using <DTA> (page 30) function.
Speaker setting
The speaker X’Over is automatically set when the
position and size of each speaker are selected from
the following items;
Item Range
Speaker Size Front “O.E.M.”, “4inch”, “5inch”, “6 1/2inch”,
“6 3/4inch”, “7inch”, “4x6”, “5x7”, “6x8”,
“6x9”, “7x10”
Speaker Location Front “Door”, “On Dash”, “Under Dash”
Speaker Size Tweeter “None”, “Use”
Speaker Size Rear “None”, “O.E.M.”, “4inch”, “5inch”,
“6 1/2inch”, “6 3/4inch”, “7inch”, “4x6”,
“5x7”, “6x8”, “6x9”, “7x10”
Speaker Location Rear “Door”, “Rear Deck”
“Minivan”, “Minivan (Long)”:
“2nd Row”, “3rd Row”
Speaker Size Subwoofer “None”, “6 1/2inch”, “8inch”, “10inch”,
“12inch”, “15inch Over”
1 Enter Speaker setting mode
Select “SOUND” > “Setup” > “Speaker”.
Sound Setup
For how to select Function Control item, refer to
<Function Control> (page 6).
2 Select the speaker you want to set
Setting speaker Display
Front speaker “FRONT”
Rear speaker “REAR"
Subwoofer “SUB W"
Turn the Control knob.
3 Select the item you want to set
Item Setting overview
“FRONT” >“SIZE”
>“LOCATION”
>“TWEETER”
Speaker Size Front
Speaker Location Front
Speaker Select Tweeter
“REAR" >“SIZE”
>“LOCATION”
Speaker Size Rear
Speaker Location Rear
“SUB W" >“SIZE” Speaker Size Subwoofer
Push the Control knob towards up or down.
4 Set the value
Turn the Control knob.
5 Repeat steps 2 to 4 to complete the speaker
settings.
6 Exit Speaker setting mode
Press the [FNC] button.