Filter
Top Products
8
|
KDC-X993/ KDC-HD942U/ KDC-X693/ KDC-MP642U
Function Control
Category Item Setting Entry Setting overview Condition Page
“SP Select”* “Front”*/
“F-R”/ “F-L”
Specify the voice output speaker. *
“Call Beep”* “ON”*/ “OFF”
Output a beep from the speaker when a call comes in. *
“BT F/W Update”* —
1 sec.
Display the firmware version and update the firmware.
38
“Beep” “OFF”/ “ON”*
Setting the operation check sound (beep sound) ON/
OFF.
—
“Clock Adjust” —
1 sec. Sets the clock. —26
“Date Adjust” —
1 sec.
Sets the date.
26
“Date Mode” 7 types
1 sec.
Sets the date display mode.
26
“SYNC” “OFF”*/ “ON”
Synchronizing the RDS station time data and this unit’s
clock.
—
“DSI” “OFF”/ “ON”*
DSI (Disabled System Indicator) of the unit blinks when
the faceplate is removed.
—
“Illumi DIM” “OFF”/ “AUTO”*
/ “MNAL1” /
“MNAL2”
Sets whether the illumination is dimmed in conjunction
with the light switch of the vehicle or it is dimmed
constantly.
*
“ILM Effect”** “OFF”/ “ON”*
Sets whether the key illumination color (KDC-X993/
KDC-X693) or brightness (KDC-HD942U/ KDC-MP642U)
is changed in conjunction with the key operation.
—
“ILM MSC SYNC” “OFF”*/ “ON”
Sets whether the key illumination color (KDC-X993/
KDC-X693) or brightness (KDC-HD942U/ KDC-MP642U)
is changed in conjunction with the sound volume.
——
“Display” “OFF”/ “ON”*
Turns off the display when no operation is performed. — *
“DISP DIM“ “OFF”/ “AUTO”*
/ “MNAL1” /
“MNAL2”
Dims the display part in conjunction with the light
switch of the vehicle.
*
“Contrast” “1” - “10”
Adjusting the display contrast. —
“DISP N/P” “POSI1”/ “2”
/ “NEGA1”/ “2”
Switches the panel display between positive or
negative.
*
“AMP” “OFF”/ “ON”*
Turns on/off the built-in amplifier. *
“Zone2” “REAR”*/
“FRONT”
Specifies the destination of AUX input sound when the
Dual Zone function is turned on.
*
“AMS Control”** —
Controls the connected LX amplifier. —26
“TI”** “OFF”*/ “ON”
Switches to the traffic information automatically when
the traffic bulletin starts.
—
“CRSC”*** “OFF”/ “ON”*
Switches to Monaural to decrease noise when
reception is poor.
—
“Receive Mode” “AUTO”*/
“DIGITAL”/
“ANALOG”
1 sec.
Sets the receive mode of HD Radio.
*
“Tag Memory” “00”- “50”
Displays the tag memory usage of HD Radio. Up to 50
tags can be registered to this unit.
19
“Tagging” “0FF”/ “ON”*
Turns ON / OFF the tag memory function of HD Radio. 19
“ESN=” —
Displays the Electronic Serial Number of satellite radio. —
“Name Set” —
1 sec.
Sets the display when switched to AUX source. 12
“Scroll” “Auto”*/
“Manual”
Specifies whether the text is scrolled automatically. ——
“Favorite Delete” —
1 sec.
Deletes Favorite Preset Memory.
34
“Built in AUX” “OFF”*/ “ON”
Sets whether to display AUX during source selection. —
“CD Read” “1”*/ “2”
Sets the CD read mode. *
“DEMO Mode” “OFF”/ “ON”*
2 sec. Specifies whether to enable demonstration. —27