Kenwood KDC-X915 Car Stereo System User Manual


 
25
Fast Forwarding Disc Play:
Hold down on the ¢ button.
Release your finger to play the disc at that point.
Reversing Disc Play:
Hold down on the 4 button.
Release your finger to play the disc at the point.
You cannot use reverse play between tracks depending on the
model being connected. Instead, the reverse play function is
canceled when it reaches the beginning of a track, at which point
normal play will automatically resume.
NOTE
Fast Forwarding and Reversing Disc Play
The external disc control mode will differ, depending on the unit
that is connected.
Mode Display Examples
"CD2" ...when a CD player is connected
"DISC" ...when a disc changer is connected
"DISC-1" , "DISC-2" ...when two disc changers are connected
Pausing and Restarting Disc Play:
Press the 38 button to make the disc pause.
Press the same button again to start play again.
When one disc has finished playing its last track, the next disc in
the changer will start playing. When the last disc in the changer
has finished, the player will return to the first disc and start
playing it.
NOTE
This function permits the connection of optional players and
the playing of discs other than the loaded CD (in the current
unit).
Playing Discs:
Press the SRC button repeatedly to select the external disc
control mode.
The disc will start playing.
NOTE
Playing Other Disc mode
Press the 38 button to make the disc pause.
Press the same button again to start play again.
Eject:
Press the ¡(EJECT) button. The faceplate will slide to eject
the CD.
Press the ¡(EJECT) button to close the faceplate.
Do not attempt to insert a CD into the slot if another one is
already there.
The unit can only play 5 in. CDs. If you insert a 3 in. CD, it will
get stuck inside and can cause the unit to malfunction.
When the faceplate has been slid open, it might interfere with
the shift lever or something else. If this happens, pay attention
to safety and move the shift lever or take an appropriate action,
then operate the unit.
The sound will be temporarily muted while the faceplate is
moving.
The only buttons that will work during the eject state are the
¡(EJECT), SRC, and ATT buttons, as well as the volume
control button.
When you load a CD and eject it right away, the next time you
try to insert the CD may not load. In such a situation, take the
CD out for a moment and then reinsert it.
NOTE
2CAUTION
KDC-X915_U.S_r4 00.12.26 3:53 PM Page 25