Kenwood KDC-X915 Car Stereo System User Manual


 
Menu settings
34
English
With automatic time adjustment, you can set the clock time
automatically according to time data sent from RDS stations
(after receiving RDS signals for several minutes). You can also
set the time manually if the automatic time adjustment
function is turned off. The factory default is manual time
adjustment.
Display and setting:
"SYNC ON" : Automatic time adjustment
"SYNC OFF" : Manual time adjustment
Adjusting Time Automatically:
Automatic Time Adjustment
You can input the text to be displayed and set the date when
that text will appear in the display with the calendar function.
Display and setting:
Select the display "Memo Mode" during the selecting function
in the menu mode.
Press either the 4 or ¢ button for at least two seconds to
enter the Memo mode.
The date display will blink.
Selecting the set of the date and text to be displayed
Press the FM and AM button.
If you want to input a new text, select the blank display.
Entering the month or day setting mode
Press the 4 and ¢ button to enter the month or day
setting mode.
The month display blinks when in month mode, the day display
blinks when in day setting mode.
Changing the month or day
Press the FM and AM button.
Entering the text input mode
Press the ¢ button to enter the text input mode.
The cursor blinks in the position where character input can be
made.
Inputting / Changing the text
Moving the cursor
Press the 4 and ¢ button.
Changing the type of characters
Press the 38 button.
Each time the button is pressed, the type of characters
switches as follows.
7
6
5
4
3
2
1
Memo Mode
Selecting the character
Press the FM and AM button.
Press the MENU button to end the menu mode.
The text you selected automatically appears on the date you set
when the units power is first turned on. (Calendar function)
the DISP button for at least one second scrolls the display
once, regardless of the text scroll setting.
Pressing a button other than the DISP button will cause the text
to disappear from the display.
You can enter up to 32 characters for each text.
The calendar function can be set up to 30 cases.
To delete the date and text setting, set both the month and day
of the date to "00" or set all of the text to blanks.
NOTE
8
Alphabet (upper case): A ~ Z
Alphabet (lower case): a ~ z
Numerals and symbols: 0~9 @ ` % & + - = , . / \ < > [ ]
Special characters: á
àéèíìóòúùÑǮߋflâäê
ë
î
ïôöûüñç©Æ›fi
KDC-X915_U.S_r4 00.12.26 3:53 PM Page 34