Kenwood KDC-X915 Car Stereo System User Manual


 
This function permits the CD text, MD title, Radio text to be
scrolled and the entire text to be displayed. Switching between
manual scrolling and automatic scrolling is permitted. The
factory default is automatic scrolling.
Display and setting:
"Scroll Auto" : Automatic scrolling
"Scroll Manual" : Manual scrolling
Text Scroll
unstable sound quality when CRSC is turned on. In such a
situation, turn it off.
Temporarily have reception switched from stereo to mono to
reduce multi-path noise when listening to the FM station.
The factory default for this function is ON.
Display and setting:
"CRSC ON" : The CRSC is on.
"CRSC OFF" : The CRSC is off.
Strong electrical fields (such as from power lines) may cause
NOTE
Clean Reception System Circuit (CRSC)
You can listen to traffic information. If you are listening to
tapes or discs, they will continue playing until a traffic bulletin
is broadcast.
Display and setting:
"TI ON" : The Traffic Information function is on.
When the function is on, the TI indicator is turned on.
When none is being received, the TI indicator will
blink on and off. When a traffic information station is
being received, the TI indicator will turn on.
When a traffic bulletin begins to be broadcast,
"TRAFFIC INFO" will be displayed.
If you are listening to a tape or disc when a traffic
bulletin begins, they will automatically be turned off.
When the bulletin ends or poor reception is
experienced, the tape or disc will begin playing again.
"TI OFF" : The Traffic Information function is off.
Switching to a Different Traffic Information Station:
Use the 4 / ¢ buttons to make an auto seek of the TI
stations in a certain band.
When you are listening to a tape or disc, you cannot change to
another TI station.
When you turn on the TI function, the motorized antenna will
extend automatically.
NOTE
Traffic Information Function
39
KDC-X915_U.S_r4 00.12.26 3:53 PM Page 39