Filter
Top Products
English
|
37
Connecting Wires to Terminals
MUTE
ANT
CONT
P.CONT
FRONT L
FRONT R
REAR L
REAR R
–
+
AUX IN
REAR
SUB
WOOFER
FRONT
FM/AM antenna input
Fuse (10A)
Wiring harness
(Accessory1)
Ignition wire (Red)
Battery wire (Yellow)
Ground wire (Black) - (To car chassis)
Ignition key
switch
Car fuse box
(Main fuse)
ACC
Car fuse
box
Battery
If no connections are made, do not let the wire come out
from the tab.
Dimmer control wire (Orange / White)
To car light control switch
External amplifier control wire
(Pink / Black)
To "EXT.AMP.CONT." terminal of the amplifier having the
external amp control function.
To front left speaker
To front right speaker
To rear left speaker
To rear right speaker
White/Black
White
Gray/Black
Gray
Green/Black
Green
Purple/Black
Purple
To KENWOOD disc changer/
External optional accessory
To connect these leads, refer to
the relevant instruction manuals.
Power control wire (Blue/White)
When using the optional power amplifier, connect
to its power control terminal.
Motor antenna control wire (Blue)
To connect the KENWOOD navigation system,
consult your navigation manual.
TEL mute wire (Brown)
Connect to the terminal that is grounded when either
the telephone rings or during conversation.
A
B
C
Ez900HDS/Ez700SR
A Aux input
B Rear output
C Front output
D Subwoofer output
Depending on what antenna you are using, connect
either to the control terminal of the motor antenna, or to
the power terminal for the booster amplifier of the film-
type antenna.
D
Left output (White), Right output (Red)
Sirius antenna
(Accessory8)
• Connection part is
fixed on vinyl tape so
that Sirius antenna is
does not come out.
• Do not bend Sirius
antenna input code
strongly.
Sirius antenna input
See next page for Mounting
the SIRIUS Antenna.