Filter
Top Products
Press the [SRCI button.
Select the “AUX” display.
2 Enter Auxiliary input display setting mode
Press the [DISPI button for at least 2 seconds.
The presently selected AUX Name is blinks.
3 Select the Auxiliary input display
Press the [WI or [MI button.
Each time the button is pressed it switches through the below
displays.
. “AUX”
l “TV”
l “VCP
l “GAME”
. “PORTABLE”
. “DVD”
4 Exit Auxiliary input display setting mode
Press the [DISPI button.
@
When operation stops for 10 seconds, the name at that time is
selected, and Auxiliary input display setting mode closes.
General features
1
Select Auxiliary input source
Function of the KDC-X659/KDC-X55:
Turning the Non-fading output ON or OFF.
Press the [NFI button for at least 1 second.
Each time the button is pressed Non-fading output switches ON
or OFF.
When it’s ON, “NF ON” is displayed.
The faceplate of the unit can be detached and taken with you,
helping to deter theft.
Removing the Faceplate
1
Press the Release button.
Drop open the faceplate.
2 Drawing the faceplate to left side pull it to the front and
remove it.
A
l
The faceplate IS a precision piece of equipment and can be
damaged by shocks or jolts. For that reason, keep the faceplate in
its special storage case while detached.
l
Do not expose the faceplate or its storage case to direct sunlight
or excessive heat or humidity. Also avoid places with too much
dust or the possibility of water splashing.
-16-