Kenwood KDC-722 Car Stereo System User Manual


 
Switching the text display.
1 Select the key function section
Press the [NEXT] button.
Repeatedly press the button until "DISP" is displayed above the
[3] button.
Refer to <Notes on Multi-function Key System> (page 8).
2 Enter display control mode
Press the [3] ("DISP") button.
3 Select the text
Press the [3] ("TEXT") button.
It can also be switched by pressing either [4] or [¢] button.
Text Display Switching
2 Enter display control mode
Press the [3] ("DISP") button.
3 Select the display mode
Press the [2] ("MODE") button.
Each time the button is pressed the display mode switches as
shown below.
Display Display Mode
"Display C" Demonstration.
"Display A" Normal display type
"Display B" Silent display type.
4 Exit display control mode
Press the [RTN] button.
Switching the display mode.
1 Select the key function section
Press the [NEXT] button.
Repeatedly press the button until "DISP" is displayed above the
[3] button.
Refer to <Notes on Multi-function Key System> (page 8).
Display Mode Switching
Fine-tuning so that the System Q value is optimal when setting
the speaker type.
1 Enter Standby
Press the [SRC] button.
Select the "ALL OFF" display.
2 Enter Speaker Setting mode
Press the [Q] button.
3 Select the Speaker type
Press the [2] — [5] button.
Each time the button is pressed the setting switches as shown
below.
Speaker type Button Display
OFF [2] "SP OFF"
For 5 & 4 in. speaker [3] "SP 5/4inch"
For 6 & 6x9 in. speaker [4] "SP 6*9/6inch"
For the OEM speaker [5] "SP O.E.M."
4 Exit Speaker Setting mode
Press the [Q] button.
Speaker Setting
General features
— 14 —
English
KDC-MP822_U.S 02.12.11 11:23 AM Page 14