Kenwood KDC-722 Car Stereo System User Manual


 
Every receivable Channel is checked for 10 seconds.
1 Start Channel Scan
Press the [AUTO] button for at least 2 seconds.
The channel number display blinks.
Channel Scan
Calling up the channels in the memory.
1 Select the preset band
Press the [FM] button.
2 Select the key function section
Press the [NEXT] button.
Hold down on the button until the function item is not displayed
above the [2] [5] button.
3 Call up the channel
Press the desired [1] — [6] button.
Preset Tuning
3 Select the key function section
Press the [NEXT] button.
Hold down on the [2] [5] button until the function item is not
displayed above the button.
Refer to <Notes on Multi-function Key System> (page 8).
4 Put the channel in the memory
Press the desired [1] — [6] button for at least 2 seconds.
The preset number display blinks 1 time.
On each band, 1 channel can be put in the memory on each [1]
— [6] button.
Only the channel number is stored. Category information is not
stored.
Putting the channel in the memory.
1 Select the preset band
Press the [FM] button.
2 Select the channel to put in the memory
Press the [4] or [¢] button.
Channel Preset Memory
Press the [FM] button.
Each time the button is pressed the preset band switches
between the SR1,SR2,SR3 and SR4.
Selecting the Preset Band
Entering the channel and tuning.
1 Enter Direct Access Tuning mode
Press the [DIRECT] button on the remote.
2 Enter the channel
Press the number buttons.
3 Do Channel Search
Press the [4] or [¢] button.
Canceling Direct Access Tuning
Press the [DIRECT] button on the remote.
If you make no button operation for 10 seconds, the Direct Access
Tuning mode is automatically canceled.
•You can set up to Channel number 223.
If there is no signal in the input Channel, "NO CH" appears.
If you cannot receive any signal in the input Channel due to a bad
condition on radio wave or another problem, "Acquiring Signal"
appears.
Direct Access Tuning (Function of remote)
Sirius tuner control features
— 30 —
English
KDC-MP822_U.S 02.12.11 11:23 AM Page 30