Filter
Top Products
Tuner features
Set the sound level of the each source selected by adjusting
the level difference between the basic sound level and the
required level.
Display and setting:
"Volume Offset" : - 8 – ± 0
Volume Offset
Adjust the phase for Non-Fading output.
Display and setting:
"NF Phase" : Normal (0°) / Reverse (180°)
•This mode is available only when the non-fading output function
is set to on.
•Not available during the Dual zone system is on.
NOTE
Phase for Non-Fading Output
Adjust the frequency of the Low-pass filter for Non-Fading
output.
Display and setting:
"LPF NF" : 50 Hz / 80 Hz / 120 Hz / Through
•This mode is available only when the non-fading output function
is set to on.
•Not available during the Dual zone system is on.
NOTE
Low-pass Filter Frequency for Non-Fading Output
Audio control features
— 18 —
English
#1 ~ 6
NAME
SRC
FM
AM
Band display
Frequency
Preset station number
ST indicator
Description about this indicator for these features can be
displayed by setting the Lower Part Display (page 11) to
"... + Function indicator".