Kenwood KRC-PS979R Car Stereo System User Manual


 
Set the time for the OFF Timer function activated when you
selected Standby mode.
If the predefined time elapses, this unit's power is
automatically turned off.
Display and setting:
"OFF – – – –" : Power OFF Timer function is cancelled.
"OFF 20min" : Unit's power goes OFF after 20 minutes.
(Default setting)
"OFF 40min" : Unit's power goes OFF after 40 minutes.
"OFF 60min" : Unit's power goes OFF after 60 minutes.
Power OFF Timer
This function permits the CD text, MD title, Radio text, and
Calender function to be scrolled and the entire text to be
displayed. Switching between manual scrolling and automatic
scrolling is permitted.
Display and setting:
"Scroll Auto" : Automatic scrolling
"Scroll Manual" : Manual scrolling (Default setting)
Text Scroll
When poor stereo reception is experienced, this function will
reduce noise and improve listening conditions.
Display and setting:
"MONO ON" : The monaural reception is on.
"MONO OFF" : The monaural reception is off. (Default setting)
Monaural Reception
<In FM reception of Tuner mode>
When the TI function is on and poor reception conditions are
experienced when listening to a traffic information station,
another traffic information station with better reception will be
searched for automatically. This function is on, when unit is
first powered on.
Display and setting:
"ATPS ON" : The Auto TP Seek Function is on.
If the traffic information station you are tuned to
experiences poor reception, this function
automatically seeks another TP station. (Default
setting)
"ATPS OFF" : The Auto TP Seek Function is off.
Auto TP Seek Function
You can choose whether or not to restrict the RDS channels,
received with the AF function for a particular network, to a
specific region. When the Region Restrict Function is on, the
region is restricted.
Display and setting:
"Regional ON" : The Region Restrict Function is on. (Default
setting)
"Regional OFF" : The Region Restrict Function is off.
Sometimes stations in the same network broadcast different
programmes or use different programme service names.
NOTE
Restricting RDS Region (Region Restrict Function)
— 41 —