Filter
Top Products
Holding down the DISP button for one second or more with
radio text displayed on the upper part display scrolls the text
once.
•Please see the menu settings (page 41) about switching
between manual scrolling and automatic scrolling.
•You can scroll text when the vertical division display mode has
been selected by the switching display mode function.
For details refer to the Switching Display Mode page for the
menu settings. (page 38)
NOTE
2
This function permits the text to be scrolled and the entire text
to be displayed. The scrolling method differs depending on the
setting of scrolling in the menu.
To scroll manually:
Press the DISP button to display radio text on the upper part
display.
Holding down the DISP button for one second or more results
in one scrolling display of the text.
To scroll automatically:
Press the DISP or CLK button to display radio text on the
upper or lower part display.
The text will be displayed in one scrolling display.
1
2
1
Radio Text Scroll
Preset the volume level to be used for traffic information and
news broadcasts.
Tune into the station for which you want to set the volume.
Adjust the volume to the desired level.
Hold down the VOL ADJ button for two seconds or more.
The volume level blinks once in the display to indicate that the
data has been stored.
Future traffic information/news broadcasts are heard at the
preset level.
•The volume cannot be lowered by this function during tuner
reception. The volume is only set when it is louder than the
listening volume of the tuner.
•You can arrange only to listen to traffic information or news
bulletins with at preset volume with the volume set at
minimum.
NOTE
3
2
1
Presetting Volume for Traffic Information/News
— 23 —