Filter
Top Products
English
12
System Setup Function
3Adjusting the Touch Position
The touch panel can be adjusted if the position
touched and the operation performed do not
match.
Accurately touch the mark at the lower left and the
mark at the upper right, following the instructions in
the messages.
When the mark at the upper right is touched, the
adjustment is completed and the system setup menu
screen reappears.
• If [ CANCEL ] is touched without touching the button
at the lower left, the adjustment is cancelled and the
screen that was set before switching to the system
setup menu reappears.
• If [ CANCEL ] is touched after touching the button at
the lower left, the button at the lower left reappears.
• If [ RESET ] is touched, the settings are reset to the
factory defaults and the setup menu screen
reappears.
NOTE
RESETCANCEL
TOUCH PANEL ADJUST
Please Touch
the Ce ter of
the Bu ton in
Lef t -Bot tom Corner
n
tthe
Touch Panel Adjustment Screen
RDS (Radio Data System)
RDS is a digital information system that lets you
receive signals besides those of regular radio
programmes, such as network information being
transmitted from radio stations.
When listening to an RDS station (ie, a station
with RDS capability), the programme service
name of the station is displayed along with the
frequency, advising you quickly which station is
being received.
RDS (Radio Data System) stations also transmit
frequency data for the same station. When you
are making long trips, this function automatically
switches to the particular frequency with the best
reception for the particular network of stations
that you want to listen to. The data is
automatically stored, allowing you to switch
quickly to another RDS stations, broadcasting the
same programme, that has better reception.
These include stations stored in the station
preset memory that you often listen to.
EON (Enhanced Other Network)
Stations that offer EON also transmit information
about other RDS stations that have traffic
information. When you are tuned to a station that
is not transmitting traffic information, but
another RDS station starts transmitting a traffic
bulletin, the tuner automatically switches to the
other station for the duration of the bulletin.
Alarm
When an emergency transmission (announcing
disasters, etc.) is sent, all current functions are
interrupted to allow the warning to be received.
3News Bulletin Function with PTY News
Timeout Setting [NEWS]
You can arrange to have news bulletins interrupt
your current listening source, including other
radio stations. When the News Bulletin function
is on, the PTY News Timeout setting allows you
to set the interval during which further news
interruption cannot take place. You can adjust the
PTY news interruption period from 10 to 90
minutes for each journey.
Changing the Function Setting:
Touch [ 2 ] or [ 3 ] repeatedly until the desired
setting is displayed.
Touch [ 3 ] to increase the interval, and the [ 2 ] to
decrease it.
OFF ↔ 00min ↔ 10min ↔ 20min ↔ 30min ↔
40min ↔ 50min ↔ 60min ↔ 70min ↔ 80min ↔
90min
(min= minutes)
When you select the news interruption timeout
interval, the News function turns on and the NEWS
indicator is displayed.
R
TN
RDS SETUP
NEWS
10mi n
AF
REG
ATPS
ON OFF
ON OFF
ON OFF
RDS Setting Screen