Filter
Top Products
R-SG7/DP-SG7/X-SG7 (EN)
11
Preparation section Basic section
Application section
Knowledge sections
System connection
DIGITAL
OUTPUT
OPTICAL
SYSTEM
CONTROL
LINE OUTPUT
LR
LR
DIGITAL IN
OPTICAL
SYSTEM
CONTROL
REC
IN
PLAY
OUT
1
2
1.In case an associated system component is connected, also read the instruction manual of the component.
2.Insert the optical-fiber cable straight into the connector until it clicks.
3.Be sure to attach the protection cap when the connector is not used.
4.Be careful not to bend, coil or bundle the optical fiber cable.
Notes
Notes
Caution for Connection
Do not plug the power cord into a wall AC out-
let until the connection has been completed.
Connect the equipment as shown in the figures.
DP-SG7
DM-SG7 (optional)
Optical fiber cable
(Supplied with
DM-SG7)
Audio cord (x2)
(Supplied with DM-SG7)
CAUTION
Be sure to adhere followings. Or proper ventilation
will be blocked causing damage or fire hazard.
÷ Install the R-SG7 on the top of the system.
÷ Do not place any objects impairing heat radia-
tion onto the top of unit.
÷ Leave a space around the unit (from the largest
outside dimension including projection) equal or
greater than, shown below.
Top panel : 50 cm
Side panel : 10 cm
Back panel : 10 cm