Filter
Top Products
R-SG7/DP-SG7/X-SG7 (EN)
28
Preparation section
Basic section
Application section
Knowledge sections
Recording
1. Load a tape in deck.
2. Select the tape transport direction.
3. Set the recording condition.
1 Open the tray of the
cassette deck.
2 Insert a tape.
3 Close the tray.
Recording
Recording
÷ When recording is started, the tape is transported in the
direction selected in this step.
÷ Wind the tape to the position where recording is to be
started.
÷ Differentiation between normal (TYPE I)
and high (TYPE II) tape is set automati-
cally.
÷ Remove tape slack before loading.
1 Press the playback key for the direction to be played (lights green).
2 Stop playback (lights red).
1 Select the reverse mode. £
2 Select the DOLBY NR mode. £
Check the tape transport direction
indicator.
Note that this cassette deck cannot record onto Metal
tapes.
Note
Note
Top side
Reverse
side
To reverse the transport direction
55
44
22
33
11
33
0
11
rev. mode
33
Dolby NR
33
2
3
Since longer tape than 100 minutes cassette tape is very thin, the
tape could adhere to the pinch roller or be easily cut. It is recom-
mended that these tapes not be used with this unit to prevent
possible damage.
NoteNote
Note