Filter
Top Products
11
MENU CONFIGURATION
Following is a list of “Direct Access” keys that can be
programmed for each of the Menus.
Many functions of this transceiver are selected or
configured via a software-controlled Menu rather than
using physical controls on the transceiver. Once
familiar with the Menu system, you will appreciate the
versatility it offers.
ACCESSING THE MENU
The following procedure explains how to check or
change any of the Menu items:
1 Press the key programmed as Menu.
• Alternatively, you can press any key that has been
pre-programmed with direct access to a particular
menu. For example, to access Menu No. 1, you
could press the key programmed as Squelch Level.
MENU SETUP
uneM
.oN
emaNuneM emaNnoitcnuFlluF
1LVLLQStnemtsujdaleveLhcleuqS
2IRALCreifiralC
3BNreknalBesioN
4THGIRBssenthgirBDCL
5PSID
:yalpsiD
ycneuqerfroemanlennahc
6XOVFFO/NOXOV
7YLDXOVemiTyaleDXOV
8NIAGXOVniaGXOV
9XOVITNAniaGXOV-itnA
01PYTLLACepyTllaC
uneM
.oN
emaNuneM yeKsseccAtceriD
1LVLLQSleveLhcleuqS
2IRALCreifiralC
3BNreknalBesioN
4THGIRBssenthgirBDCL
5PSIDyalpsiD
6XOVXOV
7YLDXOVyaleDXOV
8NIAGXOVniaGXOV
9XOVITNAniaGXOV-itnA
01PYTLLACepyTllaC
2 Press the CH / keys to select the desired
Menu number.
• CH increments the Menu number and CH
decrements the Menu number.
3 Press the <C and D> keys to select a parameter.
• Alternatively, you can press the KMC-32 microphone
C and D keys.
4 Press the key to save your selection and exit
Menu mode.
• Alternatively, you can press the microphone key.