Filter
Top Products
— 48 —
English
External disc control features
This function permits the text to be scrolled and the entire text
to be displayed. The scrolling method differs depending on the
setting of scrolling in the menu.
To scroll automatically:
Display the disc or track title referring to the "Switching the
Upper Part Display" (page 12) or "Switching the Lower Part
Display" (page 14).
The display of the text will be scrolled repeatedly.
To scroll manually:
Display the disc or track title in the upper part display, referring
to "Switching the Upper Part Display" (page 12).
Pressing the DISP button for at least one second results in one
scrolling display of the titles.
• Please see the menu settings (page 54) about switching
between manual scrolling and automatic scrolling.
•You can scroll text when "Display Type A" or "Display Type B"
has been selected by the switching display mode function.
For display mode selection, see "Switching display mode" (page
12).
NOTE
2
1
Text Scroll
Press the NAME.S button for at least two seconds.
"NAME SET" is displayed and the disc name preset mode is
entered.
The cursor blinks in the position where character input can be
made.
Press either the 4 or ¢ button to move the cursor to the
desired position.
The 4 button moves the cursor to the left, and the ¢
button to the right.
You can also move the cursor left or right by pressing the 4
or ¢ buttons, respectively, on the remote.
Each press of the 38 button results in the type of characters
that are to be entered changing between alphabet and
numerals/symbols.
Press the DISC
+ or DISC– button to display the desired
character.
Characters that can be displayed are as follows.
Continue steps 3 and 4 until all the characters are chosen for
the name.
You can enter up to 12 characters for each name.
Press the NAME.S button.
The disc name is stored and the disc name preset mode is
canceled.
If you make no entry in a 10-second period, the name will be
stored with the characters input so far.
6
NOTE
5
Alphabet (upper case): A ~ Z
Alphabet (lower case): a ~ z
Numerals and symbols: 0~9 @ ” ‘ || % & * + - = , . / \ < > [ ]
Special characters: áàéèíìóòúùÑǮߋfl
âäêë
îïôöûüñç©Æ›fi
4
3
2
Store the names of discs to be displayed when played.
Play the disc whose name you want to preset.
• This function is not available for disc changers that do not
feature the Disc Name Preset function.
• The Disc Name Preset function cannot be used during the
Magazine random play as well as while a disc title or track title
is displayed in the upper part display.
NOTE
1
Presetting Disc Names (DNPS)
Z910DVD(K)_U.S 02.12.13 6:42 PM Page 48