Filter
Top Products
15 GB/IE
desired fading level. Values between [10F] and
[10R] can be selected. The mean value is [0].
Your settings are automatically stored.
L Selecting and adjusting
playback functions
• Press the “SEL / VOL” control knob co and keep
it pressed for two seconds.
In order to select the next function, press the
“SEL / VOL” control knob co until you have
reached the desired function.
TA SEEK / ALARM:
[TA SEEK]: If the radio is not receiving any Traffic
Program Signal (TP Signal) from the current station,
the next station with a Traffic Program Signal
(TP Signal) is automatically searched for.
Or
[TA ALARM]: If the radio is not receiving any Traffic
Program Signal (TP Signal) from the current station,
the radio informs you of this with a beep.
The radio does not change stations.
• Turn the “SEL / VOL” control knob co to set the
desired function.
MASK DPI / ALL:
[DPI]: Radio stations with optimum reception
frequencies are received.
[ALL]: Radio stations without an RDS signal with a
high field strength are received.
• Turn the “SEL / VOL” control knob co to set the
desired function.
RETUNE_S / L:
[L]: The length of time during which radio stations
with traffic information are searched for is 90 sec-
onds.
[S]: The length of time during which radio stations
with traffic information are searched for is 30 sec-
onds.
• Turn the “SEL / VOL” control knob co to set the
desired function.
DSP: (OFF / POP M / ROCK M / CLASS M / FLAT M):
Selection of an acoustic pattern for various play-
back styles of music and language with preset
bass and treble levels.
• Turn the “SEL / VOL” control knob co; the
acoustic pattern of your setting for BAS and
TRE is selected.
• Turn the “SEL / VOL” control knob co until
[POP M] appears in the display window 9;
the acoustic pattern for pop music is selected.
• Turn the “SEL / VOL” control knob co until
[ROCK M] appears in the display window 9;
the acoustic pattern for rock music is selected.
• Turn the “SEL / VOL” control knob co until
[CLASS M] appears in the display window 9;
the acoustic pattern for classical music is
selected.
• Turn the “SEL / VOL” control knob co until
[FLAT M] appears in the display window 9;
the acoustic pattern for speech is selected.
LOUD ON / OFF:
The loudness function increases the playback level
of the bass sounds when the volume is low.
• Press the “SEL / VOL” control knob co.
[LOUD ON] appears in the display window 9.
• Turn the “SEL / VOL” control knob co again.
[LOUD OFF] appears in the display window 9.
ESP 10 / 40 (Electronic Shock Protection):
For the playback of CDs, CD-Rs or CD-RWs the
data are stored for either 10 or 40 seconds in ad-
vance. This enables the sound to be played back
free from interference (e.g. when driving over
bumpy surfaces).
• Turn the “SEL / VOL” control knob co until
[ESP 10] appears in the display window 9.
The data are stored for 10 seconds.
• Turn the “SEL / VOL” control knob co until
[ESP 40] appears in the display window 9.
The data are stored for 40 seconds.
MULT ON / OFF (Function not possible on the
KH 2391):
[MULT ON]: CD playback from the (optional) CD
changer.
Operation
KH2391_Content_UK.indd 15 05.09.2006 14:49:14 Uhr