Filter
Top Products
16 GB/IE
[MULT OFF]: CD playback from the CD
compartment cu.
• Turn the “SEL / VOL” control knob coto set the
desired function.
BEEP ON / OFF:
[BEEP ON]: A beep is heard through the loudspeak-
ers when the radio is operated.
[BEEP OFF]: No beep is heard when the radio is
operated.
• Turn the “SEL / VOL” control knob coto set the
desired function.
SEEK 1 / 2 :
[SEEK 1]: The automatic station search stops at
the first radio station that can be received.
[SEEK 2]: The automatic station search only stops
after the
9
button 6or the
:
button 7
is released.
• Turn the “SEL / VOL” control knob co to set the
desired function.
STEREO / MONO:
Stereo or mono sound playback during radio
reception.
• Press the “SEL / VOL” control knob co.
[STEREO] appears in the display window 9.
• Turn the “SEL / VOL” control knob co again.
[MONO] appears in the display window 9.
LOCAL / -DX-:
[LOCAL]: Radio stations in the local vicinity with a
strong transmission signal are played back.
[-DX-]: Distant radio stations with a weak trans-
mission signal are also played back.
• Turn the “SEL / VOL” control knob co to set the
desired function.
• Press the “SEL / VOL” control knob co.
Your settings are automatically stored.
After 10 seconds the device automatically changes
to playback mode.
L Setting the volume
• Increase the volume by turning the “SEL / VOL”
control knob co in a clockwise direction.
• Reduce the volume by turning the “SEL / VOL”
control knob co in an anticlockwise direction.
Mute Function
The mute function enables you to turn off the
loudspeakers.
• Press the
MU/DIM
button bo. Playback is
muted and [MUTE ON] appears in the display
window 9.
• Press the
MU/DIM
button bo again. Playback
continues as before the MUTE function was
activated and [MUTE ON] disappears from the
display window 9.
L Setting the 3-Band PLL Tuner
• Press the
•
MODE
button cn until TUNER ap-
pears in the display window.
You can select 3 x FM frequency bands (FM1, FM2
and FM3), 1 x medium wave frequency band (MW)
and 1 x long wave frequency band (LW). Each fre-
quency band has six presets on which you can
store radio stations.
• Press the
•
BAND
button bland select the fre-
quency band you wish to receive. In the
display window 9you will now see the desig-
nation of the frequency band (e.g. [FM2]), the
frequency (e.g. [99.20]) of a radio station that
is being received or the programme ID during
stereo reception and [TP] for traffic information.
Automatic Station Search
In the case of preset playback function SEEK1:
• Press the
9
button 6or
:
button 7
for two seconds. The tuner automatically stops
at the first radio station that it receives and
shows the information in the display window 9.
In the case of preset playback function SEEK2:
• Press and hold down the
9
button 6or
:
button 7in order to approach the
desired frequency. After the button has been
Operation
KH2391_Content_UK.indd 16 05.09.2006 14:49:14 Uhr