LG Electronics 39LY570H Car Satellite TV System User Manual


 
38
206-4257
(Continued from previous page)
5. Use the arrow navigation keys to select/highlight either the Option
menu icon from the TV setup menus or the Lock menu icon from the
Function Menu. Then, press the number “7” key a total of seven times
to display the TV Manager / USB Download Menu.
6. With the TV Manager / USB Download Menu on display, use the Up/
Down arrow keys to select Teach To TV (TLX), and then press OK.
7. In the Teach To TV (TLX) window, use the Up/Down arrow keys to
select the TLX le you want to install.
Note: Filenames for TLX les that were Learned from a TV are
comprised of the TV model and a ve-digit number, for example,
xxLY570H-UA00001.TLX
.
8. If the TLX le includes a Channel Map, select the desired Channel
Tuning / Channel Banner Display option at the right side of the Teach
to TV (TLX) window:
• Press the green button on the Installer Remote to select
Logical tuning, or
• Press the yellow button on the Installer Remote to select
Physical tuning.
A checkmark will appear at the left of the selected option. Logical
tuning is selected by default.
Note: If a TLX le does not include an FTG Channel Map, the
message, “No Channel Map in TLX le,” will be displayed at the right
of the screen.
9. Press OK when you are ready to initiate the Teaching process.
Teaching status will be shown on a progress bar in a new window. Do
NOT remove the USB device until Teaching is complete. When the
Teaching process is complete, the TV will briey display a “Teaching
Completed” window and then exit the TV Manager / USB Download
Menu.
10. Remove the USB memory device from the Target TV, and verify that
the appropriate configuration is now resident on the Target TV.
Note: If the Target TV was previously in Pass-through Mode and the TLX
le used for Teaching contained an FTG Channel Map, the Target TV is
now in FTG Mode via CPU.
After the Teaching process is complete, the TV tunes according to the
Start Channel setting in the Installer Menu. If a Start Channel is speci-
ed, the TV will tune to that channel; otherwise, the TV will either return
to the last channel tuned (TV in Pass-through Mode) or tune, depending
on your selection in step 8, to the lowest logical or physical channel in the
FTG Channel Map (TV in FTG Mode via CPU).
Cloning Procedures (Cont.)
TV Manager
USB
Previous
OK
Ez Download
Logo Image Download
Upgrade TV Software
Upgrade PTC Software
Teach To TV (TLX)
Updating TLX File... 50
%
Do not remove the USB from the port! Do not unplug!
xxLY570H-UA00001.tlx
Teach to TV (TLX)
xxLY570H-UA00001.TLX
Previous
OK
Channel Tuning /
Channel Banner Display
Logical
Physical