Filter
Top Products
13
206-4260
EZ-Manager Wizard (Cont.)
Initiate Conguration or Exit the EZ-Manager Wizard
The Welcome screen provides a brief introduction to the EZ-Manager Wizard.
WELCOME TO LG’S EZ-MANAGER WIZARD
EXIT
NO PRO:CENTRIC
.
Use this setup wizard to configure the TV for Pro:Centric and/or Free-To-Guest (FTG) operation.
Select NEXT to continue.
.
If a Pro:Centric Server will not be installed and/or you do not wish to use the wizard to configure this TV for FTG
Mode, you may exit the wizard.
Select NO PRO:CENTRIC to disable the Pro:Centric feature of this TV, or select EXIT to quit.
This setup wizard will start automatically in 10 seconds.
NEXT
Note: If there is no user action in this screen within 10 seconds, the wizard will proceed to the
rst conguration step. Once the wizard has proceeded, it is not possible to return to the Welcome
screen; however, if you simply wish to exit the wizard, you can do so by selecting the “Exit” option
from the subsequent screen(s).
From the Welcome screen, you have the following options:
• To proceed with the EZ-Manager Wizard, use the arrow keys on the Installer Remote to select/
highlight NEXT and press OK. Then, continue to the “TV Conguration Options” section on the
following page.
• To exit the wizard, but retain the use of the Pro:Centric remote management feature on this TV
(i.e., Installer Menu item 119 DATA CHANNEL set to 255) in the future, use the arrow keys on
the Installer Remote to select/highlight EXIT and press OK. In the conrmation pop-up window,
select OK, and then press OK once more on the Installer Remote.
• If you do not intend to install a Pro:Centric server on this system and you do not wish to use the
wizard’s Zoning or USB conguration options, exit the wizard as follows: Use the arrow keys on
the Installer Remote to select/highlight the NO PRO:CENTRIC option and press OK. This will
disable the Pro:Centric feature of this TV (i.e., Installer Menu item 119 DATA CHANNEL will be
set to 0) and exit the wizard. In the conrmation pop-up window, select OK, and then press OK
once more on the Installer Remote.