Filter
Top Products
25
206-4260
Ez Download Utility (Cont.)
(Continued from previous page)
Note: If a TV Software (CPU) le is selected, TV SW Version and Update Version elds will be
displayed at the bottom right of the screen. Ensure the software version of the selected le is the
correct version before applying the update to this TV.
9. If a TLX le that includes an FTG Channel Map is selected, a Channel Tuning / Channel Banner
Display eld will be displayed at the right of the screen. If the FTG Channel Map comprises RF
channels and Aux inputs only (the latter designated by 130-0 through 137-0), you can choose
the format for the channel tuning/banner display. Use the arrow keys on the Installer Remote to
select Logical tuning or Physical tuning. A checkmark will appear at the left of the selected
option. Logical tuning is selected by default.
Note: If an FTG Channel Map includes IP channels, only logical tuning is available. Also, if the
selected TLX le does not include an FTG Channel Map, the message, “No Channel Map in
TLX le,” will be displayed at the right of the screen.
10. When you are ready to continue, use the arrow keys on the Installer Remote to select UPDATE,
and then press OK.
Update progress will be shown in a new screen. Do NOT remove the USB device while
updates are in progress. When the Ez Download process is complete, the TV will briey
display an overview of the results and then either return to program viewing or reboot (the
latter if software has just been updated).
11. Remove the USB memory device, and verify that the appropriate configuration/update(s) is/are
resident on the TV.
Note for TLX configuration: When conguration is complete, the TV tunes according to the
Start Channel setting in the Installer Menu. If a Start Channel is specied, the TV will tune to that
channel, though in the case of FTG Mode via CPU conguration, a channel banner will only be
displayed if the Start Channel is included in the FTG Channel Map (depending on your selection
in step 9, the channel banner will display either the Start Channel’s logical channel number or
physical RF channel number). Otherwise, the TV will either return to the last channel tuned (TV
in Pass-through Mode) or tune to the rst channel in the FTG Channel Map (TV in FTG Mode via
CPU). In the latter case, remember that the channels in the FTG Channel Map are always
arranged in logical order, regardless of your selection in step 9.