Filter
Top Products
29
AUTO TURN ON
You can set the Plaza HD•T2 to switch on automatically at a
particular time. Press
to show the auto turn on menu and use
the
or buttons to set the timer to turn the receiver on once,
every day, each week, on weekdays, weekends, or particular days
of the week. Then use the
and buttons, along with the ,
and the number buttons to set the switch-on time, the channel
source (Freeview TV or radio), the channel number and the sound
volume. Press to confirm.
AUTO TURN OFF
You can set the receiver to switch off automatically at a particular
time. Press
to show the auto turn off menu and use the
or
buttons to set the timer to turn the receiver off once, every
day, each week, on weekdays, weekends, or particular days of the
week. Then use the
and buttons, along with the , and
number buttons to set the switch-off time. Press to confirm
SYSTEM MENU SECTION
Highlight the option you want to alter using the and
buttons. When you have finished making the changes you want,
leave the menu system by pressing or .
RETUNE
Press
to retune all the Freeview channels. If you retune
Freeview, you will lose all channels from the favourites lists (but
not the lists’ names), remove any channel locks you have set, and
restore channels deleted from the channel list.
MANUAL SCAN
During installation or retune, the Plaza HD•T2 scans the entire TV spectrum
for channels, which can take a while. The Manual Scan functionality is
much quicker as it scans only a specific part of the spectrum.