Filter
Top Products
19
Packing Instructions
Packing Instructions
In the event it is necessary to repack the equipment for
shipment, the equipment must be packed exactly as shown
below. It is very important that the four plastic feet are at-
tached to the bottom of the equipment. This will ensure the
proper equipment location on the bottom pad. Failure to do
this will result in shipping damage.
Use the original shipping carton and interior parts only
if they are all in good serviceable condition. If a shipping
carton or any of the interior part(s) are needed, please call
or write Customer Service Repair Department of McIntosh
Laboratory. Please see the Parts List for the correct part
numbers.
Quantity Part Number Description
1 034125 Shipping carton only
2 033837 End Cap
2 034126 End Cap
1 034044 Corrugated Wrap
1 033836 Inside carton only
1 033725 Top Pad
1 034008 Bottom pad
1 034037 Inner carton pad
4 017218 Plastic foot
4 100159 #10-32 x 3/4” Machine screw
4 104083 #10 x 7/16” Flat washer
1 049259 Shipping carton complete with
all the above parts