Filter
Top Products
9
How to Connect
How to Connect
McIntosh Control Center
1. Connect a data cable from the TUNER 1 DATA IN jack
to the TUNER DATA PORT of a McIntosh Control
Center or Preamplifier.
Note: Remote Control operation of the Tuner is made
possible with a Data Cable connected between the
MR85 and a McIntosh Control Center or
Preamplifier. If the MR85 Tuner is connected to a
non-McIntosh Preamplifier, remote control
operation is still possible with an appropriate
interface and McIntosh Remote Control. Contact
your McIntosh Dealer for additional details.
2. Connect a power control cable from the POWER CON-
TROL IN jack to the POWER CONTROL OUT or
ACC jack of a McIntosh Preamplifier, Control Center
or other McIntosh component.
3. Connect an audio cable from the TUNER 1 FIXED
OUTPUTS to the TUNER INPUTS of a preamplifier
or control center.
Note: An optional connection would be to use the TUNER 1
VARIABLE OUTPUTS.
4. Connect the FM Antenna or Cable (from the Cable
Company) to the MR85 Tuner 75Ω (Ohm) FM
ANTenna connector.
5. Connect with the supplied cable, from the 5 Pin Socket
of the McIntosh RAA1 Remote AM Antenna to the
MR85 Tuner RAA1 AM ANTenna DIN Socket.
6. Plug the MR85 AC Power Cord into an AC Outlet.
To AC Outlet