Filter
Top Products
ii
DECLARATION OF CONFORMITY ACCORDING TO ISO/IEC GUIDE 22 AND EN 45014
© 2010
Meyer Sound. All rights reserved.
MM-10 Operating Instructions, PN 05.199.005.01 A
The contents of this manual are furnished for informational purposes only, are subject to change without notice, and should not be con-
strued as a commitment by Meyer Sound Laboratories Inc. Meyer Sound assumes no responsibility or liability for any errors or inaccura-
cies that may appear in this manual. Except as permitted by applicable copyright law, no part of this publication may be reproduced,
stored in a retrieval system, or transmitted, in any form or by any means, electronic, mechanical, recording or otherwise, without prior writ-
ten permission from Meyer Sound.
MM-10, MM-4XP, MPS-488HP, MPS-488, and all alpha-numeric designations for Meyer Sound products and accessories are trademarks
of Meyer Sound. Meyer Sound and the Meyer Sound wave logo are registered trademarks of Meyer Sound Laboratories Inc. (Reg. U.S.
Pat. & Tm. Off.). All third-party trademarks mentioned herein are the property of their respective trademark holders.
Printed in the U.S.A.
Manufacturer’s Name: Meyer Sound Laboratories Inc.
Manufacturer’s Address: 2832 San Pablo Avenue
Berkeley, CA 94702-2204, USA
Declares that the product:
Product Names: MM-10 Miniature Subwoofer
MPS-488HP Power Supply
Product Options: All
Conforms to the following Product Specifications:
Safety: EN 60065:2002
Supplementary Information: The product herewith complies with the requirements of the Low Voltage
Directive (LVD) 2006/95/EC.
Signature:
Ms. Margie Garza
Director of Quality
Meyer Sound Laboratories Inc.
Berkeley, California 94702 USA
Issued July 26, 2010
European Contact:
Your local Meyer Sound dealer or
Meyer Sound Germany, GmbH.