Onkyo TX-SR602 Car Stereo System User Manual


 
32
Connecting the AV receiver
—Continued
Video Connections
You only need to use one of the following connection
methods.
Using Composite Video
Use a composite video cable to connect the AV receiver’s
V VIDEO 3 IN jack to a composite video output on your
video source, as shown.
Using S-Video
Use an S-Video cable to connect the AV receiver’s
S VIDEO 3 IN jack to an S-Video output on your video
source, as shown.
Using Component Video
If you connect to a component video input, you must
assign it (see page 43).
Use a component video cable to connect the AV
receiver’s COMPONENT VIDEO IN 2 or IN 3 jack to a
component video output on your video source, as shown.
Audio Connections
Using Optical or Coaxial Connections
If you connect to a digital audio input, you’ll need to
assign it (see page 42).
Use an optical digital audio cable to connect one of the
AV receiver’s OPTICAL DIGITAL IN jacks to an
optical output on your video source, as shown.
OR
Use a coaxial digital audio cable to connect one of the
AV receiver’s COAXIAL DIGITAL IN jacks to a
coaxial output on your video source, as shown.
Notes:
•To connect the AV receiver to an LD player’s AC-3RF
output, you need a commercially available demodula-
tor.
Connecting Other Video Sources—
Satellite, Cable, Set-top box, LD
Player, etc.
VIDEO OUT
IN
VIDEO 3
Satellite, cable, set-top
box, LD player, etc.
S VIDEO OUT
VIDEO 3
IN
Satellite, cable, set-top
box, LD player, etc.
COMPONENT
VIDEO OUT
IN
Y
P
B
PR
Y
P
B
PR
COMPONENT VIDEO
Satellite, cable, set-top
box, LD player, etc.
OPTICAL
IN
DIGITAL
IN
COAXIAL
DIGITAL OUT
OPTICAL
DIGITAL OUT
COAXIAL
Satellite, cable, set-top box, LD player, etc.
Connect one or the other