Onkyo TX-SR602 Car Stereo System User Manual


 
34
Connecting the AV receiver
—Continued
Using Optical or Coaxial Connections
If you connect to a digital audio input, you’ll need to
assign it (see page 42).
Use an optical digital audio cable to connect one of the
AV receiver’s OPTICAL DIGITAL IN jacks to the
optical output on your CD player, as shown.
OR
Use a coaxial digital audio cable to connect one of the
AV receiver’s COAXIAL DIGITAL IN jacks to the
coaxial output on your CD player, as shown.
Using Analog Connections
Even if your CD player is connected digitally (coaxial or
optical), to use , or to record audio from your CD
player, you’ll need to make an analog audio connection
as well.
Use an analog audio cable to connect the AV receiver’s
CD IN L/R jacks to the analog audio output on your CD
player, as shown.
Use an analog audio cable to connect the AV receiver’s
TAPE IN L/R jacks to the cassette recorder’s output, and
use another analog audio cable to connect the AV
receiver’s TAPE OUT L/R jacks to the cassette
recorder’s input, as shown.
You can connect a DAT, CD, or MD recorder instead of
a cassette recorder.
Analog Connections
Use an analog audio cable to connect the AV receiver’s
TAPE IN L/R jacks to the recorder’s output, and use
another analog audio cable to connect the AV receiver’s
TAPE OUT L/R jacks to the recorder’s input, as shown.
Connecting a CD Player
OPTICAL
IN
DIGITAL
IN
COAXIAL
DIGITAL OUT
OPTICAL
DIGITAL OUT
COAXIAL
CD player
Connect one or the other
IN
CD
AUDIO
OUTPUT
L
R
CD player
Connecting a Cassette Recorder
Connecting a DAT, CD, or MD
Recorder
/
OUT
TAPE
R
L
R
L
R
L
R
L
IN
(IN) (OUT)
REC PLAY
Cassette recorder
OUT
TAPE
R
L
R
L
R
L
R
L
IN
(IN) (OUT)
REC PLAY
DAT, CD, or MD recorder