Filter
Top Products
30
Connecting the AV receiver
—Continued
This section shows how to connect a VCR for playback
so that you can watch videos via the AV receiver.
Video Connections
• Use an S-Video cable to connect the AV receiver’s
S VIDEO 1 IN jack to a S-Video output on your VCR,
as shown.
OR
• Use a composite video cable to connect the AV
receiver’s V VIDEO 1 IN jack to a composite video
output on your VCR, as shown.
An S-Video connection provides better picture quality
than a composite video connection.
Audio Connections
• Use an analog audio cable to connect the AV receiver’s
VIDEO 1 IN L/R jacks to an analog audio output on
your VCR, as shown.
Video Connections
If you connect to a component video input, you must
assign it (see page 43).
Use a component video cable to connect the AV
receiver’s COMPONENT VIDEO IN2 or 3 jacks to a
component video output on your D-VHS VCR, as
shown.
Your TV must also be connected via component video.
Audio Connections
If you connect to a digital audio input, you'll need to
assign it (see page 42).
• Use an optical digital audio cable to connect one of the
AV receiver’s OPTICAL DIGITAL IN jacks to an
optical output on your D-VHS VCR, as shown.
OR
• Use a coaxial digital audio cable to connect one of the
AV receiver’s COAXIAL DIGITAL IN jacks to a
coaxial output on your D-VHS VCR, as shown.
Connecting a VCR for Playback
VIDEO 1
LR
S VIDEO OUT
VIDEO OUT
AUDIO
OUTPUT
IN
IN
L
R
VCR
Connect one
or the other
Connecting a D-VHS VCR for Playback
IN
Y
P
B
PR
COMPONENT
VIDEO OUT
COMPONENT VIDEO
Y
P
B
PR
D-VHS VCR
DIGIT
IN
COAXIAL
DIGITAL OUT
OPTICAL
DIGITAL OUT
COAXIAL
AL
OPTICAL
IN
D-VHS VCR
Connect one or the other