Onkyo TX-SR702 Car Stereo System User Manual


 
65
Advanced Operation
—Continued
You can adjust the level of individual speakers during
playback. These adjustments are temporary and will be
cancelled when the AV receiver is set to Standby.
Notes:
•You cannot use this function while the AV receiver is
muted.
Speakers that are set to No or None in the Speaker
Configuration cannot be adjusted.
The DVD analog multichannel input is for connecting
components with a 5.1-channel analog audio output,
such as a DVD player or MPEG decoder.
See “Using a Multichannel Connection” on page 29 for
connection information.
Notes:
•To use the bass and treble functions with the DVD
analog multichannel input, select the Multich listening
mode first.
Adjusting Individual Speaker Levels
You can adjust the level of individual speakers while
using the DVD analog multichannel input.
Notes:
These speaker level settings are completely indepen-
dent of those explained on pages 50 and left column.
While the DVD analog multichannel input is selected,
you can only select the Direct, Pure Audio (not Amer-
ican TX-SR602), or Multich listening mode. If you
select the DVD analog multichannel input while using
another listening mode, that listening mode will be
cancelled.
While the DVD analog multichannel input is selected,
the Automatic Speaker Setup and Speaker Configura-
tion settings on page 46 are ignored, and signals from
the multichannel input are fed to the front left, front
right, center, surround left, and surround right speak-
ers, and subwoofer regardless of those settings.
On the TX-SR702E, you can select the listening
modes as explained on page 61. In addition, sound is
output by the surround back speakers.
Adjusting Individual Speaker Levels
1
Press the [RECEIVER] button,
use the [CH SEL] button to select
each speaker, and use the
[LEVEL–] and [LEVEL+] buttons
to adjust the volume.
Speakers are selected in the following
order: Front Left
Center
Front
Right
Surr Right
Surr Back
Right
Surr Back Left
Surr left
Subwoofer.
You can adjust the volume of each
speaker from –12 dB to +12 dB
(–15 dB to +12 dB for the subwoofer).
The name of the currently selected
speaker and its volume appear on the
display, as shown.
RECEIVER
CH SEL
LEVEL – +
MULTI CH
RECEIVER
CH SEL
LEVEL
+
LEVEL
-
Using the DVD Analog Multichannel
Input
1
Press the [RECEIVER] button fol-
lowed by the [MULTI CH] button
so that “MCH” appears on the
display.
1
Use the remote controller’s [CH
SEL] button to select each
speaker, and then use the
[LEVEL–] and [LEVEL+] buttons
to adjust the volume.
The level can be adjusted from –12 to
+12 dB (–30 to +12 dB for the sub-
woofer).
RECEIVER
CH SEL
LEVEL
+
LEVEL
-