Filter
Top Products
16
CQ-C7205U/C7105U
Selection by CategoryFunctions Only by
Remote Control Unit
Direct Access
A channel can be directly selected.
Example: channel number 5
1
Press [#] (NUMBER).
2
Press [5].
3
Press [SET].
Note: To suspend direct selection, press [DISP]
(DISPLAY).
You can toggle the category on and off every time you
hold down [BAND] for 2 sec. or more. If the category is
set to on, the unit operates as follows for each button:
Do not set Category to ON while receiving Channel 1.
Failure to observe this disables channel change.
Channel selection
[]] (TUNE): Preceding channel in current category
[[] (TUNE): Next channel in current category
Category selection
[{] (P-SET: Preset): Preceding category
[}] (P-SET: Preset): Next category
TEXT Setting (XM Receiver Menu Display)
1
Press [MENU] to display the menu dis-
play.
For using the remote
control, hold down
[SEL] (MENU) for 2
sec. or more.
2
Press [PUSH SEL] to adjust.
For using the remote
control, use [BAND]
(SET).
3
Press [MENU] to close the menu
screen.
For using the remote control, hold down [SEL]
(MENU) for 2 sec. or more.
TEXT
Text display
: Enabled (default)
: Disabled
lights when category is set to on.
XM Receiver (continued)