Filter
Top Products
20
CQ-C7205U/C7105U
Hands-Free Phone System
Preparation
Connecting Hands-Free Phone System
Connect the Hands-Free Phone System (CY-BT100U) and
establish the pairing. Refer to the instruction manual for
the Hands-Free Phone System for further information.
Note: This unit is designed only for receiving calls.
It cannot send calls.
1
Press [Hang-on] on the Hands-Free
Phone System and pick up the phone.
The phone is in the incoming state.
2
Adjust the volume if necessary.
3
Press [Hang-up] on the Hands-Free
Phone System and hung up the phone.
Adjust the ring volume
The ring volume is adjustable from this unit.
(Setting range: OFF/LOW/MID/HIGH, Default: MID)
[}]:
up
[{]:
down
Notes:
¡The ring volume is adjustable only when receiving
calls.
¡The ring volume is adjustable only when the phone
ring comes out of the main unit.
¡The ring volume is also adjustable by turning [VOL].
Reject calls
Pressing [Hang-up] allows users to reject a call when
the call is coming in.
Bluetooth disconnection/reconnection
Pressing [Hang-up] allows users to temporarily
disconnect when the phone is in the waiting state.
Pressing [Hang-up] allows users to reconnect when the
Bluetooth unit is temporarily disconnected.
Be sure to read “Safety Information” in the Operating Instructions for the Hands-Free Phone System before use.
Operation Flow
Status indicator (Blue LED)
lights: Call waiting/Talking
stays out: Not connected
blinks rapidly: Receiving a call
blinks slowly:
Pairing/Reconnecting
[Hang-on]/Blue LED
[Hang-up]/Red LED
Switch Unit