Filter
Top Products
VEHICLE INSTALLATION
Toyota / Scion / Isuzu / Honda-Passport
Before connecting any cables to the
Aux2Car
you must set the dip switches to the
Aux2Car you must set the dip switches to the Aux2Car
correct position. If you set the dip-switches after you have connected cables to the
interface, you must disconnect and reconnect them for the
Aux2Car
to operate.
Aux2Car to operate.Aux2Car
DIP SWITCHES MUST BE SET BEFORE YOU PLUG IN THE
Aux2Car
!!!
Aux2Car !!!Aux2Car
1
2
3
4
5
6
7
8
on
on
off
on
off
off
off
on
SETTINGS FOR
TOYOTA
Toyota 1998 – 2005 – Connects behind the radio with
PXHTY1
2003 and newer :4Runner; Sequoia; Rav4; Prius;
Sienna; Tundra; Tacoma; Highlander Must use Toyota
cable adapter, part # 08695-00370
Isuzu 1998-2003 – Connects behind the radio with
PXHTY1
Scion 2003-2005 – Connects behind the radio ( Must
use Toyota cable adapter, part #08695-00370)
Toyota Matrix uses the PXHGM3 cable with GM class
2 settings. Please see GM section.
Cars that need cable part #08695-00370, can only be
purchased from Toyota dealerships.
Call your nearest Toyota dealership, and ask for the
parts dept.
OPERATION
Switch to the
Aux2Car
adaptor by pressing the “CD” button.
Aux2Car adaptor by pressing the “CD” button.Aux2Car
13