Filter
Top Products
Ford (Ford, Lincoln, Mercury)
Before connecting any cables to the
Aux2Car
you must set the dip switches to the
Aux2Car you must set the dip switches to the Aux2Car
correct position. If you set the dip-switches after you have connected cables to the
interface, you must disconnect and reconnect them for the
Aux2Car
to operate.
Aux2Car to operate.Aux2Car
VEHICLE INSTALLATION
if you use PXHFD1, PXHFD2 make sure that you connect the Black wire to ground and the
Yellow wire to constant 12V+. *If you don’t know the location of constant 12V+, please use a
Volt meter, or consult a Ford dealership.
DIP SWITCHES MUST BE SET BEFORE YOU PLUG IN THE
Aux2Car
!!!
Aux2Car !!!Aux2Car
1
2
3
4
5
6
7
8
on
on
off
off
off
off
off
on
1
2
3
4
5
6
7
8
off
on
off
off
off
off
off
on
SETTINGS FOR FORD
FOCUS & COUGAR
SETTINGS FOR ALL
OTHERS
See the next page for a full list of vehicles as well as plug location in each.
OPERATION
Switch to the
Aux2Car
adaptor by pressing the “CD” button on the radio.
Aux2Car adaptor by pressing the “CD” button on the radio. Aux2Car
If you would like to connect
Aux2Car
adaptor to 2004 - Town Car,
Aux2Car adaptor to 2004 - Town Car, Aux2Car
Grand Marquis, Marauder, LS and Ford Crown Victoria, please see
Ford appendix, page 19.
6