Philips 24PFL42x8H/K/T Car Satellite TV System User Manual


 
EN 13
English
Increase or decrease the TV volume
Press +/- on the remote control.
Press +/- on the TV.
Mute or restore the TV volume
Press on the remote control to
mute the volume.
Press again to restore the volume.
Adjust headphone volume
1. Press .
2. Select [Setup] > [TV settings] > [Sound]
> [Headphone volume], then press OK.
3. Select a level.
Switch TV channels
Press CH +/- on the remote control or
TV.
Press the Numeric buttons on the
remote control to enter a channel
number.
Manage favourite channels
You can view all channels or only a list of
your favourite channels.
Create a list of your favourite channels
1. Press LIST.
The channel list is displayed.
2. Select the channel to mark as favourite,
then press OPTIONS.
3. Select [Add/remove favourites], then
press OK.
The selected channel is marked with an
asterisk.
To remove a channel from the favourites list,
select [Add/remove favourites], then press
OK.
Display your list of favourite channels
1. Press LIST, then press OPTIONS.
2. Select [List] > [Favourites] to display
channels in the favourite list.
3. Press OK to confirm.
Manage channel lists
After the channels are installed, you can:
Filter channels.
Switch between antenna and cable
channels.
Rename channels.
Reorder channels.
Lock a channel.
Listen to digital radio.
Filter channels
1. While you watch TV, press LIST.
2. Press OPTIONS, then select [Filter].
3. Select an option, then press OK.
[Digital + Analogue]: Display all
channels in the channels list.
[Digital TV channels]: Display only
digital channels.
[Analogue Channels]: Display only
analogue channels.
[Free / scrambled]: Display all channels
in the channels list.
[Scrambled channels]: Display only
scrambled channels.
[Free channels]: Display only free
channels.
Note: The filtering options may vary
according to your broadcaster.
Switch between antenna and cable channels
You can switch between antenna and cable
channels while you are watching TV.
1. While you watch TV, press .
2. Select [Setup] > [Channel settings] >
[Channel installation] > [Antenna
connection].