Filter
Top Products
33
Access CAM services
1 Insert and activate the CAM (see ‘Insert
and activate a CAM’ on page 38).
2 Press OPTIONS.
3 Select [Common interface].
» Applications provided by the digital TV
service operator are displayed.
Note
This menu option is available only if the CAM
is inserted and activated correctly.
Rearrange channels
After you install channels, you can rearrange the
order in which they appear.
1 While you watch TV, press FIND.
» The channel matrix menu is displayed.
2 Press OPTIONS.
» The channel options menu appears.
3 Select [Reorder], then press OK.
4 Select the channel to rearrange, then
press OK.
» The selected channel is highlighted.
5 Move the highlighted channel to its new
location, then press OK.
6 Press OPTIONS.
7 Select [Done reordering], then press
OK.
Test digital reception
You can check the quality and signal strength
of digital channels. This allows you to reposition
and test your antenna or satellite dish.
1 Press .
2 Select [Setup] > [Channel settings]
> [Channel installation] > [Digital:
Reception test] , then press OK.
3 Enter the frequency to test, then press
OK.
4 Select [Search], then press OK.
5 When the channel is found, select
[Store], then press OK.
Note
If the signal quality and strength is poor,
reposition the aerial or satellite dish and retest.
If you still have problems with the reception
of your digital broadcast, contact a specialised
installer.
English
EN
Downloaded From TV-Manual.com Manuals