Filter
Top Products
Troubleshooting
Screen image is too
small
Image is centered
on screen, but
does not fill entire
viewing area
● Perform the LCD Monitor factory reset (via
Menu -> Factory Reset -> All Settings).
Cannot adjust the
LCD Monitor with
the buttons at the
side of the unit
OSD does not
appear on the
screen
● Turn the LCD Monitor off and unplug the
power cord and then plug back and power on.
For further assistance, refer to the Consumer Information Centers list and contact your local
Philips distributor.
RETURN TO TOP OF THE PAGE
OSD Warning Messages
A warning message may appear on the screen indicating the LCD Monitor current status.
When user sees this warning message, it means
that the LCD Monitor is in adjustment process.
A warning message may appear on the screen
indicating that the LCD Monitor is out of sync
range.
See Specifications for the Horizontal and Vertical
frequency ranges addressable by this the LCD
Monitor. Recommended mode is 1360 x 768 @
60Hz.
file:///D|/My%20Documents/dfu/BDL_27/english/420wn6/SAFETY/saf_troub.htm (5 of 6)2006-03-10 1:33:58 PM
Downloaded From TV-Manual.com Manuals