Filter
Top Products
23
English
About Bluetooth device
Cannot pair the Bluetooth enabled device
with the car audio system.
required for the system.
The Bluetooth function of the device is
not enabled. Refer to the user manual of
the device for how to enable the function.
The audio quality is poor after connection
with a Bluetooth-enabled device.
The microphone is not correctly
positioned. Adjust the position of the
microphone onto the dashboard where
close to the driver.
The Bluetooth reception is poor. Move
the device closer to the car audio system
or remove any obstacle between the
device and the system.
Music playback is unavailable on the system
even after successful Bluetooth connection.
The device cannot be used with the system to
play music.
The paired mobile phone connects and
disconnects constantly.
The Bluetooth reception is poor. Move
the mobile phone closer to the car audio
system or remove any obstacle between
the mobile phone and the system.
Some mobile phones may connect and
disconnect constantly when you make
or end calls. This does not indicate any
malfunction of the system.
connection may be deactivated
automatically as a power-saving feature.
This does not indicate any malfunction of
the system.
11 Troubleshooting
Caution
Never remove the casing of this device.
the system yourself.
If you encounter problems when using this
requesting service. If the problem remains
ensure that your apparatus is nearby and the
model number and serial number are available.
No power or no sound.
Car engine is not on. Turn the car engine
on.
Cable is not connected properly. Check
connections.
Fuse is burnt. Replace fuse.
Volume is too low. Adjust volume.
the RESET button.
Ensure that the track played is of a
compatible format.
Noise in broadcasts.
Signals are too weak. Select other
stations with stronger signals.
Check the connection of the car antenna.
Change broadcast from stereo to mono.
Preset stations lost.
Battery cable is not connected correctly.
Connect the battery cable to the terminal
that is always live.
Display show ERR-12
USB data error. Check the USB device.
Display show ERR-3
USB/SD data error.
EN