37
English
EN
Tip
• When the unit is reset, all the settings remain
unchanged.
Replace fuse
If there is no power, the fuse may be damaged
and need to be replaced.
1 Take out the unit from dashboard.
2 Check the electric connection.
3 Buy a fuse that matches the voltage of the
damaged fuse (15A).
4 Replace the fuse.
Tip
• If the fuse breaks immediately after it has been
replaced, there may be an internal malfunction. In this
case, consult your Philips dealer.
15A
15A
12 Product
information
Note
• Product information is subject to change without prior
notice.
General
Power supply 12 V DC (11 V - 16 V),
negative ground
Fuse 15 A
Suitable speaker
impedance
4 - 8
Maximum power
output
50 W x 4 channels
Continuous power
output
24 W x 4 channels
(4 10% T.H.D.)
Pre-Amp output
voltage
2.0 V ( CD play mode;
1 kHz, 0 dB, 10 k
load)
Subwoofer output
voltage
2.0 V (CD play mode,
61 Hz, 0 dB, 10 k
load)
Aux-in level 500 mV
Dimensions (W x H
x D)
178 x 50 x 210 mm
Weight (main unit) 3.1 kg
Disc player
System DVD / CD audio /
MP3 system
Frequency response 20 Hz - 20k Hz
Signal/noise ratio >75dB
Total harmonic
distortion
Less than 1%
Channel separation >55dB
Video signal format NTSC only
Video output 1 +/- 0.2V