Philips CEM3000B Car Stereo System User Manual


 
15
5 Listen to
Digital Audio
Broadcasts
(DAB)
Digital Audio Broadcasting (DAB), is a way
of broadcasting radio digitally through a
network of transmitters. It provides you with
more choice, better sound quality, and more
information.
For the first time when DAB mode is
switched on.
1 Press SOURCE on the main unit
repeatedly to select DAB/DAB+.
The system performs auto scan. »
All the available DAB stations are »
stored.
The radio tunes to the first available »
station
Tip
The display shows a rectangle. The position
of the rectangle indicates the degree of signal
strength. (The further towards the right, the
greater the signal strength.)
If there is no DAB coverage currently available,
or DAB signal is too weak in your area, no
DAB station will be found, and message like
“No Station Found, Scan Again” displays.
Tune to DAB radio station
manually
1
Under DAB mode, press and hold /
to enter manual seek mode.
“MANUAL” blinks on LCD screen. »
2 Press / repeatedly until the the
desired channel/frequency appears.
Set RDS clock
You can use time signal that is broadcast
together with the RDS signal to set the clock
of the unit automatically.
1 Press MENU.
2 Press / repeatedly until [CT]
displays.
3 Rotate to select a setting:
[CT ON]: Turn on the RDS clock.
Time shown on the unit synchronizes
with that on the RDS station.
[CT OFF]: Turn off the RDS clock.
Tip
The accuracy of the transmitted time depends
on the RDS station that transmits the time
signal.
English
EN