Philips CEM3000B Car Stereo System User Manual


 
22
[POP] (pop)
[USER] (user)
[TECHNO] (techno)
[ROCK] (rock)
[CLASSIC] (classic)
[JAZZ] (jazz)
Turn on/off max sound
1
Press
 6281'
.
The current setting is displayed. »
» [MAX ON]: The maximum sound
(max sound) function is on.
» [MAX OFF]: The maximum sound
function is off.
Other sound settings
You can also change the preset EQ/Audio
settings.
1 Press EQ/Audio for 3 seconds.
2 Press / repeatedly to select the item
to be adjusted:
[BASS LEVEL] range: -7 to +7
[BASS CFQ] (bass center frequency)
range: 60, 80, 100, 200.
[MIDDLE LEVEL] range:-7 to +7
[MIDDLE CFQ] (middle center
frequency) range: 0.5k, 1.0k, 1.5k, 2.5k.
[TREBLE LEVEL] range: -7 to +7
[TREBLE CFQ] (treble center
frequency) range: 10.0k, 12.5k, 15.0k,
17.5k.
[BALANCE] range: 12L to 12R.
(L= left speaker, R = right speaker)
[FADER] range: 12R to 12F.
(R = rear speaker, F = front speaker)
[SUBWOOFER] range: 0 to 12.
[RESUME]: Resume the audo setting
value to factory default value.
3 Rotate to select a value/option.
7 Adjust sound
Adjust volume
1
Rotate clockwise/anticlockwise to
increase/decrease volume.
Mute
You can turn off the sound of your audio.
1 During play, press .
To resume sound, press
again.
Turn DBB and subwoofer
on/off
1
Press DBB, then the current setting is
displayed:
» [DBB ON] : The Dynamic Bass Boost
(DBB) function is on.
» [DBB OFF] : The DBB function is off.
2 Press DBB again to change the DBB
setting.
3 Press and hold DBB to access subwoofer
settings:
» [SUBWOOFER ON]: The subwoofer
function is on.
» [SUBWOOFER OFF]: The subwoofer
function is off.
Select preset equalizer
1
Press EQ/Audio.
Current Equalizer setting is displayed. »
2 Press EQ/Audio again to select a preset
EQ setting:
[OPTIMAL] (optimal)
[FLAT] (flat)
EN