Filter
Top Products
21
Connect external sound
source
1
Connect the external sound source to
MP3 LINK connector with a 3.5 mm
cable.
2 Press SOURCE repeatedly until [MP3
LINK] is displayed.
3 Operate the external component
(See the instructions supplied with the
external component).
Control music playback on iPod/
iPhone
1 Make sure that the iPod/iPhone is
connected correctly.
2 Press SOURCE to select iPod USB mode.
3 Press repeatedly to toggle between the
two control modes:
• iPod control mode: Use the buttons/
touch screen on iPod/iPhone to
control the music.
• Audio control mode: Use the
control buttons on car audio to
control the music.
To control playback under audio control
mode:
To pause/resume play, press •
.
To skip to a track, press •
/ .
To search during play, press and •
hold
/ , then release to resume
normal play.
To navigate the menu, press •
,
rotate
to select, then press to
confirm.
Search for a track on iPod/iPhone
1 Press SOURCE repeatedly to select iPod
mode.
2 Press BAND/ to browse iPod/iPhone
menu.
3 Rotate to select the artist search
mode, and press
to confirm.
4 Press DISP/ to search alphabetically.
5 Rotate to select artist, then press to
confirm.
6 Rotate to select song in current album.
7 Press to start play.
Note
You cannot control the music via iPod/iPhone •
under audio control mode.
English
EN