Filter
Top Products
26 EN
14 Troubleshooting
Warning
• Never remove the casing of this apparatus.
To keep the warranty valid, never try to repair
the product yourself.
If you encounter problems when using this
product, check the following points before
requesting service. If the problem remains
unsolved, go to the Philips Web page
(www.philips.com/welcome). When you contact
Philips, make sure that the product is nearby
and the model number and serial number are
available.
General
No power or no sound.
• The power supply from car battery is cut
off, or the car battery runs out of energy.
Power the system with car battery.
• Car engine is not on. Turn the car engine
on.
• Cable is not correctly connected. Check
connections.
• Fuse is burnt. Replace fuse.
• Volume is too low. Adjust volume.
• If the above solutions cannot help, press
the RESET button.
• Make sure that the current track is in a
compatible format.
Noise in broadcasts.
• Signals are too weak. Select other stations
with stronger signals.
• Check the connection of the car antenna.
• Change the broadcast setting from stereo
to mono.
Preset stations lost.
• Battery cable is not correctly connected.
Connect the battery cable to the terminal
that is always live.
Display show ERR-12
• USB data error. Check the USB storage
device.
GPS signal reception of the iPhone or iPod
touch is poor.
• Remove the iPhone or iPod touch from
the dock, and place it in aother location for
better signal reception.
About Bluetooth device
Cannot pair the Bluetooth enabled device
with the car audio system.
• Thedevicedoesnotsupporttheproles
required for the system.
• The Bluetooth function of the device is not
enabled. Refer to the user manual of the
device for how to enable the function.
The audio quality is poor after connection
with a Bluetooth-enabled device.
• The microphone is not correctly
positioned. Adjust the position of the
microphone. For example, stick the
microphone onto the dashboard where
close to the driver.
• The Bluetooth reception is poor. Move the
device closer to the car audio system or
remove any obstacle between the device
and the system.
Music playback is unavailable on the system
even after successful Bluetooth connection.
• The device cannot be used with the
system to play music.